Three Minute Tips #6 – Make A ‘Dark Room…’

Yeah, a dark room, not a darkroom.

I really hate film changing bags.  They’re horrible little sweaty bags of hell.  Its incredible how quickly your hands get soaked with sweat inside them, and ask anybody whose ever loaded film onto a processing spool, if any of it gets wet you’ll ruin your film.  It’ll stick to the spool and snag up and crease and you’ll swear and want to smash things and then you’ll give up…its true.

This is what I do.

Simply four cushions from Ikea, that are normally on our sofa.  They fit perfectly into the window rebate (is that the word) and seal out the light.  Or seal in the dark…  Works best when its dark outside but in a pinch can be done during the day.  I switch off the lights in the nearby rooms so no stray light leaks in under the door or anything, and there you go, a room where I can load my tanks and bulk loaders in complete dark without having to use those stupid sweaty hell bags.  Theres plenty of space to lay things out and theres even a ‘seat’ should it be needed…! 😃

Try it, you’ll never go back I swear.

Advertisements

Three Minute Tips #5 – Semi Stand Development.

So every now and again I’ll purchase a new camera and inside there is a roll of film – sometimes with just a few frames shot, sometimes almost finished and I’ll always finish off the roll and attempt to develop them.

Last year (2017) two such examples were an original Diana and some ‘faux’ TLR whose name I have forgotten…

The roll that was in the Diana was a roll of Boots branded black and white film that even had a few frames left.  I didn’t even know that Boots ever made roll film and my attempts to contact them about it failed.

So anyway, this is supposed to be a three minute tip – sorry I forgot.  The best way I have found to cope with these old films, or unknown films, is a semi stand development process.  With regular black and white development your film is submerged in a solution of developer for between 5 and 10 minutes on average, and you agitate it in the solution once a minute or so.  This all varies between films and developers.  Usually you’ll mix up your developer to a ratio of something like 1:25 (developer:water) but with a semi stand I tend to do 1:100.  This creates a much weaker solution so therefore the film needs to be in it longer – about 90 minutes I have personally found best so far.  The film out of the Diana, at the time of me processing it, I had absolutely no idea how old it was.  The Diana was brought to market in the 1960, so the film couldn’t have been shot before that (although technically it could have already been an old film before it was put in the camera…), and much internet research could not get me any information whatsoever about Boots ever selling their own branded 120 roll film – so it couldn’t be very recent either.

With early old film – this one could in theory have been 50 odd years old – I really worry that too much agitation is going to cause parts of, or all of the emulsion to lift away from the base of the film.  I believe that stand developing with minimal agitation will minimise this risk.

The other issue aside from the age was that being able to find any info on the film also meant that I had no developing times for it.  Again, stand developing seems to circumnavigate this issue, as I have developed several different emulsions in the same mixture and technique with success.  I use Rodinal R09 at a ratio of 1:100 and leave it for 90 minutes.  Every half an hour I will give a small agitation with the spinner on the top of the tank.  I don’t do a full inversion – I don’t want all that liquid sloshing around in the tank and running the risk of possibly lifting the old emulsion.

Below are a couple of examples from the Boots roll –

…and thats it.  To conclude – weak developer, longer time, unknown film, old film.  Again I hope this post has been of use to somebody.

Just to add, below passage taken from Wikipedia, so you can choose whether or not you think its true –

“It (stand developing) has a compensating effect whereby the developer exhausts itself in areas which require greater development whilst remaining active in less-exposed areas, which has the effect of boosting shadow detail whilst preserving bright highlights.”

 

 

 

…and by the way, looking at the clothes 1960s…?

Three Minute Tips #4 – Make yourself a Force Washer

If you’re developing your own black and white film at home in your sink you’ll know that you need to wash your film under running water that is approximately the same temperature as your chemicals.  If you don’t have a mixer tap, a great alternative is one of those push on / pull off shower head attachments that you can buy for your bath taps.  One end goes on the cold tap, one on the hot, cut the shower head off and hey presto you have one of those force film washers for less than a fiver.

Three Minute Tips #3 – Negative to Positive

There are a few apps available that allow you to preview your film negative as a positive.  A quicker way that I have been using for a long time to do it is to invert the colours on my smart phone.  Im sure most smartphones can do this but i have an iPhone 6s and I know how to do this on iOS.

Settings, General, Accessibility, Display Accommodations.  At the top of the list you will see ‘Invert Colours.’  Click on this and toggle ‘Classic Invert.

It inverts all the colours over the whole of the operating system – including the camera.  When you then hold your camera up to a film negative, preferably on a light box you will see on screen the positive version.

…but thats not quick you say…!?  Well no, thats not, but if you go again to your Accessibility settings, scroll right to the bottom and go to the Accessibility Shortcut tab you can set this up as a shortcut from the iPhones home button.  Three clicks of the button from any screen and the screen will invert.  Three clicks again and its back to normal.

Its no alternative for a scan, but helpful for quick reference.

C-41 In Rodinal – Test Results

So last night I burned a roll of pound land 35mm in the garden taking the same shot, so that I had a roll of 35mm that I could try some timed tests in Rodinal for varying times.  In the darkroom I extracted the length of film from the canister and cut it into three lengths. Each of these lengths was then loaded onto a separate spiral and then into a dev tank.

I mixed up a Rodinal solution of 1:50 and at 20 degrees started the tests one at a time.  The 12 and the 13 minutes were fine but looked pretty much the same once pulled out of the tank.  For this reason I added an extra thirty seconds to the 14 minute tank to try and get through and get a thinner neg.

Results below…

Alright yeah I know that they’re not easy to see details but you get the idea, they all look fairly similar.

Here you go this is a scan and close up.  I think that the 13 minute result is the best for overall contrast .  I am slightly confused though as the 11 minute result from the other day pre-scanned like this –

I seemed like the neg was too dense for my scanner to see through, resulting in this horrible digital mess. When putting the question out there on the internet I received much the same response.  I had hoped that leaving in the dev for longer would cut through some of the orange base and it would appear that this has worked.  Or at least something else has worked…!  Either way I appear to be able to get a workable neg out of a c-41 film in black and white chemicals.

So to recap.

13 minutes in Rodinal 1:50.  Agitate for the first minute then the first ten seconds of each remaining minute after.

One minute in ILFOSTOP, agitating for the full minute.

5 minutes in Ilford Rapid Fixer, agitating for the first minute and then the first ten seconds of each remaining minute.

Ten minute wash in 20 degree (or there abouts) water.

Final wash in Kodak Photo Flo.  About six dunks in a tank of solution.

Hang to dry as normal.

Kodak Photo Flo – An Amendment

So it does seem that I was wrong in a previous post about the use of photo flo as I was still getting streaky negs but I seem to have sorted it now….

I have found that my favoured way is to make up a jug of Photo Flo, not accurately – about 300ml of water and about half a ml of Flo (use a syringe) and then ‘drag’ my negs through it.  I attach the regular drying/hanging weighted hooks to both ends as normal for drying and then whilst holding them both in each hand, allow the film to curl slightly into a C shape under its own weight.  I then lower it into the jug and allow the length to submerge in the jug.  You can then do this a few time, hold it up and you will see the solution running off.  A couple of dips normally does the job just fine.  The strips of film are then hung as normal with a towel under them to catch the remaining solution as it rolls off.  Again, don’t wash the solution off, and now I don’t even recommend squeegeeing them – there doesn’t appear to be the need and you eliminate the risk of damage to the negs.

Hope that helps somebody…!

C-41 In Rodinal Tests

This is something for tomorrow morning, and ill keep you posted on how it works out.  I have just burned through a roll of pound land special 35mm (AgfaVista 200 if you don’t know…) and intend to test the film in Rodinal tomorrow for different times.

I have had varying ‘success’ before with c-41 in black and white chems but I intend to do some research and try and perfect the process.